10BASE-FL
E17247
10BASE-FL is an Ethernet standard for 10 Mbps data transmission over fiber-optic cabling, commonly used for longer-distance network links.
All labels observed (2)
How this entity was disambiguated
This entity first appeared as the object of triple T139621 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
NED1
Entity disambiguation (via context triple)
gpt-5-mini-2025-08-07
Target entity: 10BASE-FL Context triple: [IEEE 802.3, defines, 10BASE-FL]
-
A.
10BASE2
10BASE2 is an older Ethernet standard that uses thin coaxial cable to provide 10 Mbps networking over relatively short distances in a bus topology.
-
B.
10GBASE-T
10GBASE-T is an Ethernet standard for transmitting 10 gigabits per second over twisted-pair copper cabling, commonly used for high-speed local area networks.
-
C.
RJ45
RJ45 is a standardized 8-pin modular connector commonly used for terminating Ethernet network cables in computer and telecommunications networking.
-
D.
IEEE 802.3at
IEEE 802.3at is a Power over Ethernet (PoE+) standard that increases the power available to networked devices beyond the original PoE specification, enabling support for more demanding equipment such as PTZ cameras and wireless access points.
-
E.
IEEE 1394
IEEE 1394 is a high-speed serial bus interface standard, commonly known as FireWire, used for real-time data transfer between digital devices such as computers, cameras, and audio/video equipment.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
NED2
Entity disambiguation (via description)
gpt-5-mini-2025-08-07
Target entity: 10BASE-FL Target entity description: 10BASE-FL is an Ethernet standard for 10 Mbps data transmission over fiber-optic cabling, commonly used for longer-distance network links.
-
A.
10BASE2
10BASE2 is an older Ethernet standard that uses thin coaxial cable to provide 10 Mbps networking over relatively short distances in a bus topology.
-
B.
10GBASE-T
10GBASE-T is an Ethernet standard for transmitting 10 gigabits per second over twisted-pair copper cabling, commonly used for high-speed local area networks.
-
C.
RJ45
RJ45 is a standardized 8-pin modular connector commonly used for terminating Ethernet network cables in computer and telecommunications networking.
-
D.
IEEE 802.3at
IEEE 802.3at is a Power over Ethernet (PoE+) standard that increases the power available to networked devices beyond the original PoE specification, enabling support for more demanding equipment such as PTZ cameras and wireless access points.
-
E.
IEEE 1394
IEEE 1394 is a high-speed serial bus interface standard, commonly known as FireWire, used for real-time data transfer between digital devices such as computers, cameras, and audio/video equipment.
- F. None of above. chosen
Statements (46)
| Predicate | Object |
|---|---|
| instanceOf |
Ethernet physical layer standard
ⓘ
IEEE 802.3 standard ⓘ |
| applicationDomain | local area networks ⓘ |
| approximateIntroductionYear | 1993 ⓘ |
| backwardsCompatibleWith | FOIRL ⓘ |
| belongsToFamily | 10BASE Ethernet standards ⓘ |
| category | 10 Mbit/s Ethernet ⓘ |
| collisionDomain | shared in half-duplex mode ⓘ |
| collisionHandling | CSMA/CD in half-duplex mode ⓘ |
| compatibleWith | 10BASE-T at MAC layer ⓘ |
| connectorType |
SC connector
ⓘ
ST connector ⓘ |
| dataRate | 10 Mbit/s ⓘ |
| designedFor | long-distance Ethernet links ⓘ |
| distanceLimitWithFOIRLCompatibility | 1000 meters ⓘ |
| duplexModeInOriginalSpec | half-duplex ⓘ |
| encodingScheme | Manchester encoding ⓘ |
| introducedInStandardRevision | IEEE 802.3j ⓘ |
| laterSupportedDuplexMode | full-duplex ⓘ |
| lineCode | baseband ⓘ |
| maximumSegmentLength | 2000 meters ⓘ |
| medium | fiber-optic cable ⓘ |
| nameComponent |
10 indicates 10 Mbit/s
ⓘ
BASE indicates baseband signaling ⓘ FL indicates fiber link ⓘ |
| OSIlayer | physical layer ⓘ |
| powerBudgetCharacteristic | supports long multimode fiber runs ⓘ |
| replaces | FOIRL ⓘ |
| requires | fiber transceiver ⓘ |
| standardizedIn |
IEEE 802.3
ⓘ
linked to:
IEEE 802.3 Ethernet standard
|
| status | legacy technology ⓘ |
| successorTechnologies |
1000BASE-SX
ⓘ
100BASE-FX ⓘ |
| supports |
full-duplex operation
ⓘ
half-duplex operation ⓘ |
| supportsAutoNegotiation | false ⓘ |
| topology | star topology ⓘ |
| typicalMaximumDistance | 2000 meters ⓘ |
| typicalUseCase | connecting Ethernet hubs or switches over fiber ⓘ |
| usedFor |
inter-building connections
ⓘ
long horizontal runs ⓘ network backbone links ⓘ |
| uses |
LED light source
ⓘ
multimode fiber ⓘ |
| usesSignaling | synchronous serial signaling ⓘ |
| usesWavelength | 850 nm (typical) ⓘ |
How these facts were elicited
The pipeline generated the facts above by prompting gpt-5.1 with this entity's name + description and the instruction below.
Instruction
You are a knowledge base construction expert. Given a subject entity and a description of it, return factual statements that you know for the subject as a JSON list of dictionaries(triples), where keys must be "subject", "predicate" and "object". The number of facts may be very high, between 25 to 50 or more, for very popular subjects. For less popular subjects, the number of facts can be very low, like 5 or 10. # Requirements - If you don't know the subject at all, return an empty list. - If the subject is not a named entity, return an empty list. - Include at least one triple where predicate is "instanceOf". - Do not get too wordy. - Separate several objects into multiple triples with one object.
Input
Subject: 10BASE-FL Description of subject: 10BASE-FL is an Ethernet standard for 10 Mbps data transmission over fiber-optic cabling, commonly used for longer-distance network links.
Referenced by (2)
Full triples — surface form annotated when it differs from this entity's canonical label.
subject linked to:
IEEE 802.3 Ethernet standard
linked to: 10BASE-FL