ATA-1

E38932

ATA-1 is the first generation of the ATA (AT Attachment) interface standard used to connect storage devices like hard drives and optical drives to a computer’s motherboard.

AI illustration

How this image was made

AI-generated illustration of ATA-1

This AI-generated illustration was produced by black-forest-labs/FLUX.2-dev (1024x1024) from a prompt written by openai/gpt-oss-120b from the entity's label + description.

Prompt

Generate an image of ATA-1 (ATA-1 is the first generation of the ATA (AT Attachment) interface standard used to connect storage devices like hard drives and optical drives to a computer’s motherboard.)

All labels observed (1)

Label Occurrences
ATA-1 canonical 5

How this entity was disambiguated

Statements (46)

Predicate Object
instanceOf ATA standard ⓘ
interface standard ⓘ
storage device interface ⓘ
alsoKnownAs ATA ⓘ
IDE ⓘ
backwardCompatibility not applicable (first ATA standard) ⓘ
basedOn PC/AT bus architecture ⓘ
linked to: IBM PC AT
busType Parallel ATA ⓘ
cableType 40-conductor ribbon cable ⓘ
category computer hardware interface standard ⓘ
disk interface standard ⓘ
commandSet ATA command set ⓘ
definedBy ANSI ⓘ
defines electrical characteristics for ATA devices ⓘ
identify device command ⓘ
register interface between host and device ⓘ
signal timings for ATA bus ⓘ
designGoal replace separate disk controller cards ⓘ
deviceRoles master ⓘ
slave ⓘ
fullName AT Attachment ⓘ
linked to: ATA
generation first generation ATA ⓘ
hostInterface ISA/AT bus via host adapter ⓘ
influenced later ATA/ATAPI standards ⓘ
interfaceType parallel interface ⓘ
logicalUnitLimitPerChannel 2 devices per channel ⓘ
maxDataTransferMode PIO mode 2 ⓘ
maxDataTransferRate 8.3 MB/s ⓘ
maxDevicesPerChannel 2 ⓘ
predecessorOf ATA-2 ⓘ
primaryUseEra early 1990s PCs ⓘ
replacedBy ATA-2 ⓘ
EIDE implementations ⓘ
scope integrated drive controller on the drive ⓘ
standardNumber ANSI X3.221-1994 ⓘ
linked to: ANSI
standardStatus obsolete ⓘ
supports CHS addressing ⓘ
LBA addressing (basic) ⓘ
PIO modes 0–2 ⓘ
single-word DMA modes 0–2 ⓘ
targetPlatform IBM PC compatible systems ⓘ
linked to: IBM PC compatible
usedFor connecting ATAPI devices ⓘ
connecting hard disk drives ⓘ
connecting optical drives ⓘ
connecting storage devices to a computer motherboard ⓘ
yearStandardized 1994 ⓘ

How these facts were elicited

Referenced by (5)

Full triples — surface form annotated when it differs from this entity's canonical label.