IEEE 802.1Qcx YANG data model for bridge management standard
E2826
The IEEE 802.1Qcx YANG data model for bridge management standard defines a structured, machine-readable configuration and management model for Ethernet bridges to support automated and interoperable network management.
All labels observed (1)
| Label | Occurrences |
|---|---|
| IEEE 802.1Qcx YANG data model for bridge management standard canonical | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T12968 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
NED1
Entity disambiguation (via context triple)
gpt-5-mini-2025-08-07
Target entity: IEEE 802.1Qcx YANG data model for bridge management standard Context triple: [IEEE Standards Association, develops, IEEE 802.1Qcx YANG data model for bridge management standard]
-
A.
IEEE 802.1Qcp YANG data model standard
The IEEE 802.1Qcp YANG data model standard defines a structured, machine-readable configuration and management model for VLAN and bridging features in Ethernet networks, enabling interoperable network automation and control.
-
B.
IEEE 802.1Qbv time‑sensitive networking standard
The IEEE 802.1Qbv time‑sensitive networking standard defines enhancements to Ethernet scheduling that enable deterministic, low-latency communication for time-critical applications such as industrial automation and automotive networks.
-
C.
IEEE 802.1Q VLAN tagging standard
The IEEE 802.1Q VLAN tagging standard defines how virtual LANs are implemented and identified over Ethernet networks by inserting a VLAN tag into Ethernet frames.
-
D.
IEEE 802.1CM fronthaul standard
The IEEE 802.1CM fronthaul standard is a Time-Sensitive Networking (TSN) specification that defines Ethernet-based transport requirements and profiles for carrying mobile fronthaul traffic in 4G/5G radio access networks.
-
E.
IEEE 802.3af Power over Ethernet standard
The IEEE 802.3af Power over Ethernet standard defines a method for delivering electrical power along with data over standard Ethernet cabling to devices such as IP phones, wireless access points, and network cameras.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
NED2
Entity disambiguation (via description)
gpt-5-mini-2025-08-07
Target entity: IEEE 802.1Qcx YANG data model for bridge management standard Target entity description: The IEEE 802.1Qcx YANG data model for bridge management standard defines a structured, machine-readable configuration and management model for Ethernet bridges to support automated and interoperable network management.
-
A.
IEEE 802.1Qcp YANG data model standard
The IEEE 802.1Qcp YANG data model standard defines a structured, machine-readable configuration and management model for VLAN and bridging features in Ethernet networks, enabling interoperable network automation and control.
-
B.
IEEE 802.1Qbv time‑sensitive networking standard
The IEEE 802.1Qbv time‑sensitive networking standard defines enhancements to Ethernet scheduling that enable deterministic, low-latency communication for time-critical applications such as industrial automation and automotive networks.
-
C.
IEEE 802.1Q VLAN tagging standard
The IEEE 802.1Q VLAN tagging standard defines how virtual LANs are implemented and identified over Ethernet networks by inserting a VLAN tag into Ethernet frames.
-
D.
IEEE 802.1CM fronthaul standard
The IEEE 802.1CM fronthaul standard is a Time-Sensitive Networking (TSN) specification that defines Ethernet-based transport requirements and profiles for carrying mobile fronthaul traffic in 4G/5G radio access networks.
-
E.
IEEE 802.3af Power over Ethernet standard
The IEEE 802.3af Power over Ethernet standard defines a method for delivering electrical power along with data over standard Ethernet cabling to devices such as IP phones, wireless access points, and network cameras.
- F. None of above. chosen
Statements (46)
| Predicate | Object |
|---|---|
| instanceOf |
IEEE standard
ⓘ
YANG data model specification ⓘ network management standard ⓘ |
| aimsTo |
enable consistent configuration of bridges across vendors
ⓘ
improve interoperability of network management systems ⓘ support automation of bridge configuration ⓘ |
| appliesTo | Ethernet bridges ⓘ |
| basedOn | concepts from IEEE 802.1 bridge architecture ⓘ |
| benefit |
facilitation of automated monitoring
ⓘ
facilitation of automated provisioning ⓘ facilitation of automated troubleshooting ⓘ improved consistency of configuration across devices ⓘ reduced complexity of multi-vendor bridge management ⓘ |
| defines | YANG data model for bridge management ⓘ |
| domain |
Ethernet networking
ⓘ
data communications ⓘ |
| enables |
programmatic configuration of bridge parameters
ⓘ
standardized representation of bridge state ⓘ vendor-neutral bridge management ⓘ |
| focusesOn |
configuration of Ethernet bridges
ⓘ
management of Ethernet bridges ⓘ |
| governingBody |
IEEE
ⓘ
IEEE 802.1 Working Group ⓘ |
| intendedForUseWith |
network controllers
ⓘ
network management systems ⓘ software-defined networking environments ⓘ |
| partOf |
IEEE 802.1 family of standards
ⓘ
linked to:
IEEE 802.1 standards family
IEEE 802.1Q series ⓘ
linked to:
IEEE 802.1 standards family
|
| provides |
structured machine-readable configuration model
ⓘ
structured machine-readable management model ⓘ |
| relatedTo |
IEEE 802.1Q VLAN Bridges
ⓘ
linked to:
IEEE 802.1Q VLAN tagging standard
NETCONF ⓘ RESTCONF ⓘ network configuration protocols ⓘ |
| scope |
management of bridge configuration data
ⓘ
management of bridge operational state data ⓘ management of bridge statistics ⓘ |
| supports |
automated network management
ⓘ
interoperable network management ⓘ model-driven network management ⓘ policy-based configuration of bridges ⓘ |
| targetEnvironment |
data center networks
ⓘ
enterprise networks ⓘ service provider networks ⓘ |
| typeOf | layer 2 management specification ⓘ |
| uses | YANG modeling language ⓘ |
How these facts were elicited
The pipeline generated the facts above by prompting gpt-5.1 with this entity's name + description and the instruction below.
Instruction
You are a knowledge base construction expert. Given a subject entity and a description of it, return factual statements that you know for the subject as a JSON list of dictionaries(triples), where keys must be "subject", "predicate" and "object". The number of facts may be very high, between 25 to 50 or more, for very popular subjects. For less popular subjects, the number of facts can be very low, like 5 or 10. # Requirements - If you don't know the subject at all, return an empty list. - If the subject is not a named entity, return an empty list. - Include at least one triple where predicate is "instanceOf". - Do not get too wordy. - Separate several objects into multiple triples with one object.
Input
Subject: IEEE 802.1Qcx YANG data model for bridge management standard Description of subject: The IEEE 802.1Qcx YANG data model for bridge management standard defines a structured, machine-readable configuration and management model for Ethernet bridges to support automated and interoperable network management.
Referenced by (1)
Full triples — surface form annotated when it differs from this entity's canonical label.
IEEE Standards Association
→
develops
→
IEEE 802.1Qcx YANG data model for bridge management standard
ⓘ