ITU-T Recommendation Q.1902
E1474264
UNEXPLORED
ITU-T Recommendation Q.1902 is an international telecommunications standard that defines the Bearer Independent Call Control (BICC) protocol for call control in next-generation networks.
All labels observed (1)
| Label | Occurrences |
|---|---|
| ITU-T Recommendation Q.1902 canonical | 1 |
How this entity was disambiguated
This entity first appeared as the object of triple T21225224 — resolving that mention is where its identity was fixed. The disambiguator weighed these candidate entities and picked the highlighted one (or “None”, minting a new entity). This is how homonymy is resolved: the same surface form can point to different entities.
NED1
Entity disambiguation (via context triple)
gpt-5-mini-2025-08-07
Target entity: ITU-T Recommendation Q.1902 Context triple: [BICC, specifiedIn, ITU-T Recommendation Q.1902]
-
A.
ITU-T Recommendation Q.1901
ITU-T Recommendation Q.1901 is an international telecommunications standard that defines the Bearer Independent Call Control (BICC) protocol for call control over diverse transport networks.
-
B.
ITU-T Q.700-series recommendations
The ITU-T Q.700-series recommendations are a set of international standards that define the architecture, protocols, and signaling procedures for the Signaling System No. 7 (SS7) telecommunications network.
-
C.
ITU-T Recommendation G.8263
ITU-T Recommendation G.8263 is an international standard that specifies timing and synchronization requirements for packet-based networks, particularly for frequency synchronization over packet-switched infrastructures.
-
D.
ITU-T G.9972
ITU-T G.9972 is an international telecommunications standard that defines coexistence mechanisms allowing multiple broadband power line communication systems to operate without interfering with each other on the same wiring infrastructure.
-
E.
ITU-T Recommendation G.8262.1
ITU-T Recommendation G.8262.1 is an international telecommunication standard that specifies enhanced synchronous Ethernet equipment clocks to ensure highly accurate and stable frequency synchronization in packet-based networks.
- F. None of above. chosen
- G. Unsure - the case is ambiguous/there is not enough information to decide.
NED2
Entity disambiguation (via description)
gpt-5-mini-2025-08-07
Target entity: ITU-T Recommendation Q.1902 Target entity description: ITU-T Recommendation Q.1902 is an international telecommunications standard that defines the Bearer Independent Call Control (BICC) protocol for call control in next-generation networks.
-
A.
ITU-T Recommendation Q.1901
ITU-T Recommendation Q.1901 is an international telecommunications standard that defines the Bearer Independent Call Control (BICC) protocol for call control over diverse transport networks.
-
B.
ITU-T Q.700-series recommendations
The ITU-T Q.700-series recommendations are a set of international standards that define the architecture, protocols, and signaling procedures for the Signaling System No. 7 (SS7) telecommunications network.
-
C.
ITU-T Recommendation G.8263
ITU-T Recommendation G.8263 is an international standard that specifies timing and synchronization requirements for packet-based networks, particularly for frequency synchronization over packet-switched infrastructures.
-
D.
ITU-T G.9972
ITU-T G.9972 is an international telecommunications standard that defines coexistence mechanisms allowing multiple broadband power line communication systems to operate without interfering with each other on the same wiring infrastructure.
-
E.
ITU-T Recommendation G.8262.1
ITU-T Recommendation G.8262.1 is an international telecommunication standard that specifies enhanced synchronous Ethernet equipment clocks to ensure highly accurate and stable frequency synchronization in packet-based networks.
- F. None of above. chosen
Referenced by (1)
Full triples — surface form annotated when it differs from this entity's canonical label.